Ruijie RG-S2900G-E Series User Manual

Configuration Guide NFPP Configuration
Command
Function
Ruijie# copy running-config
startup-config
Save the configurations.
Caution
With the dhcpv6-guard disabled, the monitored hosts are
auto-cleared.
Configuring the isolated time
For the isolated time of the attacker, it can be configured in the global or
interface configuration mode. By default, the isolated time is configured in the
global configuration mode.
Command
Function
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# nfpp
Enter the nfpp configuration mode.
Ruijie(config-nfpp)# dhcpv6-guard
isolate-period [seconds | permanent]
Configure the global isolated time,
ranging 0s, 30-86400s(one day). The
default value is 0s, representing no
isolation. Permanent represents
permanent isolation.
Ruijie(config-nfpp)# end
Return to the privileged EXEC mode.
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# interface interface-name
Enter the interface configuration mode.
Ruijie(config-if)# nfpp arp-guard
isolate-period [seconds | permanent]
Configure the isolated time on the port,
ranging 0s, 180-86400s(one day). By
default, the isolated time is configured
globally. 0s represents no isolation.
Permanent represents permanent
isolation.
Ruijie(config-if)# end
Return to the privileged EXEC mode.
Ruijie# show nfpp dhcpv6-guard
summary
Show the parameter settings.

Ruijie RG-S2900G-E Series Specifications

General

Brand	Ruijie
Model	RG-S2900G-E Series
Category	Switch
Language	English