Ruijie RG-S2900G-E Series - Return to the Privileged EXEC Mode; Enter the Global Configuration Mode

Configuration Guide NFPP Configuration
Note
Field
Description
Interface
Global refers to the global configuration.
Status
Enable/disable the arp-guard.
Rate-limit
In the format of NS-NA rate-limit threshold / RS
rate-limit threshold / RA-redirect rate-limit
threshold.
Attack-threshold
In the same format of the Rate-limit.
-
No configuration.
NFPP Syslog
NFPP Syslog Overview
A NFPP log is generated in the NFPP syslog buffer area after detecting the
attack. Use the NFPP log to generate the syslog at the specified rate and delete
the NFPP log from the NFPP syslog buffer area.
NFPP syslog configuration commands include:
 Configuring NFPP log-buffer entry number
 Configuring the rate of generating NFPP syslog
 Configuring NFPP log filtering
 Clearing NFPP syslog
 Showing NFPP syslog
Configuring NFPP log-buffer entry number
The administrator can configure the NFPP log-buffer entry number in the nfpp
configuration mode.
Command
Function
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# nfpp
Enter the nfpp configuration mode.
Ruijie(config-nfpp)# log-buffer entries
number
Configure the NFPP log-buffer area
size(in the range of 0-1024), 256 by
default.
Ruijie(config-nfpp)# end
Return to the privileged EXEC mode.