Configuration Guide Web-based Configuration
Figure 1-16 DHCP relay
1) Enabling/disabling DHCP relay
To enable or disable the DHCP relay function, select the related option button and click Save to
validate the configuration.
2) Setting DHCP server
Set the IP address for the DHCP server and then click Save to validate the configuration. The
configuration result is displayed in the following figure. To delete the DHCP server, tick the
check box and click Delete to validate the configuration.
IGMP Snooping
Use the function through the menu item IGMP Snooping .
IGMP Snooping setting page
To Next Page
Loading...
