Ruijie RG-S2900G-E Series - Page 221

Configuration Guide Share VLAN Configuration
Configuration Example
Switch configuration:
Core switch
Port 1 is a hybrid port; PVID is VLAN 10; all VLANs are untagged; port 3 and
port 4 are trunk ports; all VLANs are allowed VLANs; the native VLAN is VLAN
1.
Aggregate switch 1
Port 2 and port 3 are trunk ports; all VLANs are allowed VLANs; the native
VLAN is VLAN 1.
Aggregate switch 2
Port 2 and port 4 are trunk ports; all VLANs are allowed VLANs; the native
VLAN is VLAN 1.
Access switch 1