Ruijie RG-S2900G-E Series - Page 231

Configuration Guide Voice VLAN Configuration
Protocol Specification
N/A
Default Configuration
The following table is used to describe the default configuration of Voice VLAN.
Function
Default value
Voice VLAN enablement
Disabled
Voice VLAN safe mode
Enabled
Voice VLAN aging time
One day (1440 minute), only valid under auto
mode.
Voice VLAN CoS
6
Voice VLAN DSCP
46
Voice VLAN enablement on port
Disabled
Voice VLAN working mode on port
Auto mode
Configuring Basic Voice VLAN Features
Following sections will describe how to configure basic Voice VLAN features:
(Mandatory) Enabling Voice VLAN
(Mandatory) Enabling Voice VLAN on a port
(Optional) Configuring Voice VLAN working mode on a port
(Optional) Configuring Voice VLAN aging time
(Mandatory) Configuring Voice VLAN OUI address
(Optional) Configuring Voice VLAN safe mode
(Optional) Configuring voice stream priority of Voice VLAN
Showing Voice VLAN configuration and status
Enabling Voice VLAN
Voice VLAN is disabled by default. To enable voice VLAN, run the following
commands.
Command
Function
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# vlan vlan-id
Create a Voice VLAN.
Ruijie(config-vlan)# exit
Exit VLAN configuration mode.