Ruijie RG-S2900G-E Series - Page 278

Configuration Guide MSTP Configuration
To disable BPDU Filter, execute the no spanning-tree portfast bpdufilter
default command in the global configuration mode.
To enable or disable BPDU Filter on an interface, execute the spanning-tree
bpdufilter enable command or the spanning-tree bpdufilter disable
command in the interface configuration mode.
Enabling Tc_Protection
To configure Tc_Protection, execute the following commands in the global
configuration mode:
Command
Function
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# spanning-tree
tc-protection
Enable Tc-Protection
Ruijie(config)# end
Return to the privileged EXEC mode.
Ruijie# show running-config
Verify the configuration.
Ruijie# copy running-config
startup-config
Save the configuration.
To disable Tc_Protection, execute the no spanning-tree tc-protection
command in the global configuration mode.
Enabling TC Guard
To enable TC Guard globally, execute the following commands in the global
configuration mode:
Command
Function
Ruijie# configure terminal
Enter the global configuration mode.
Ruijie(config)# spanning-tree
tc-protection tc-guard
Enable TC Guard globally.
Ruijie(config)# end
Return to the privileged EXEC
mode.
Ruijie# show running-config
Verify the configuration.
Ruijie# copy running-config
startup-config
Save the configuration.
To configure TC Guard on an interface, execute the following commands in the
interface configuration mode:
Command
Function