Configuration Guide IGMP Snooping Configuration
vlan 1
-------------
IGMP Snooping :Enabled
Multicast router learning mode :pim-dvmrp
IGMPv2 immediate leave :Disabled
vlan 2
-------------
IGMP Snooping :Enabled
Multicast router learning mode :pim-dvmrp
IGMPv2 immediate leave :Disabled
vlan 3
-------------
IGMP Snooping :Disabled
Multicast router learning mode :pim-dvmrp
IGMPv2 immediate leave :Disabled
vlan 4
-------------
IGMP Snooping :Enabled
Multicast router learning mode :pim-dvmrp
IGMPv2 immediate leave :Disabled
Configuring the Aging Time for the Dynamic Router Port
If no IGMP general query packets or PIM Hello packets are received on the dynamic router port
within the aging time, the router port will be deleted.
To configure the aging time for the dynamic router port, execute the following commands in the
global configuration mode.
To Next Page
Loading...
