Configuration Guide AAA Configuration
the device, and the request message carried by the user is aaa@domain.com, the device
determines that the user belongs to the domain.com but not the domain.com.cn.
Domain-name-based AAA Service Configuration Example
The following is an example of configuring the domain-name-based AAA service:
Ruijie(config)# aaa new-model
Ruijie(config)# radius-server host 192.168.197.154
Ruijie(config)# radius-server key test
Ruijie(config)# aaa authentication dot1x default group radius
Ruijie(config)# aaa domain domain.com
Ruijie(config-aaa-domain)# authentication dot1x default
Ruijie(config-aaa-domain)# username-format without-domain
After the configuration, with the user a1 in the radius server, use the 802.1x client to login the
server for authentication by keying in the username a1@domain.com and the correct
password. The following shows the related domain-name information:
Ruijie#show aaa domain domain.com
=============Domain domain.com=============
State: Active
Username format: Without-domain
Access limit: No limit
802.1X Access statistic: 0
Selected method list:
authentication dot1x default
To Next Page
Loading...
