Configuration Guide RADIUS Dynamic Authorization Extension Configuration
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# no radius dynamic-authorization-extension port
Ruijie(config)# show running-config
Examples for Configuring RADIUS Dynamic Authorization Extension
Networking Requirements
1) RADIUS dynamic authorization extension must work with the authentication mechanism. The network comprises
SAM servers, RADIUS servers, Ruijie access devices, and PCs of users.
2) Ruijie access devices must support RADIUS dynamic authorization extension.
Network Topology
Figure 2 Network topology of RADIUS dynamic authorization extension
To Next Page
Loading...
