Configuration Guide WEB Authentication Configuration
port : 80
homepage : http://www.web_auth.com/webportal/index.jsp
session-limit : 255
timeout : 3
direct-site
Address Mask ARP Binding
--------------- ---------------- -----------
192.168.4.1 255.255.255.255 On
192.168.5.1 255.255.255.255 On
direct-host
Address Mask Port ARP Binding
--------------- ---------------- ---------- ----------
192.168.4.12 255.255.255.255 Fa0/3 On
37) Query the range of IP addresses of users for which web authentication is not required.
Ruijie# show web-auth direct-host
direct-host
Address Mask Port ARP Binding
--------------- ---------------- ---------- ----------
192.168.4.12 255.255.255.255 Fa0/3 On
38) Query the authentication configuration and statistics on interfaces.
Ruijie# show web-auth port-control
Port Control
------------------------- ----------
FastEthernet 0/1 Off
FastEthernet 0/2 On
FastEthernet 0/3 On
Typical Configuration Examples of Second-generation Web Authentication
Networking Requirements
The network is deployed with a Radius server, a Portal server (which may integrate the functions of
the Radius server), a DHCP server, a pass-through server (website), a DNS server, a core device, a
convergence device, and several access devices and user PCs.
The Portal server supports second-generation web authentication.
The access devices support second-generation web authentication.