Configuration Guide SSH Terminal Service Configuration
If the key pair has not been generated, generate a new key pair (Create Identity
File). During key generation, you can set a password (the password can be
blank) for the private key. If so, you need to enter the password in every
authentication. See the following figure.
Figure 8
During key generation, do not move the cursor continuously, or the creation
takes a long time.
The key file of the OpenSSH format must be selected, or the key file cannot
be used. If Putty serves as the client, the puttygen.exe tool must be used to
transform the private key into the Putty format. The puttygen.exe tool can
generate the key pair of the OpenSSH format, but Putty cannot directly use
such a key pair. The public-key file on the server does not need to be
transformed. Its format is still OpenSSH. See the following figure.
To Next Page
Loading...
