Configuration Guide CPU Protection Configuration
Showing the Statistics of the Packets Received by the CPU of the Management
Board
In the privileged mode, show the CPP information of the supervisor engine by
using the following commands:
Ruijie# show cpu-protect mboard
Show the statistics of the packets received by
the CPU of the supervisor engine
The following example shows how to show the CPP information of the
supervisor engine:
Ruijie#show cpu-protect mboard
Type Pps Total Drop
------------ --------- --------- ---------
arp 500 19 0
bpdu 200 24 0
dhcp 0 0 0
gvrp 0 0 0
ipv6-mc 0 0 0
igmp 0 0 0
ospf 0 0 0
pim 0 0 0
rip 0 0 0
vrrp 0 0 0
unknow-ipmc 0 0 0
err-ttl 0 0 0
Showing the Statistics of the Packets Received by the CPU of the Line Card
In the privileged mode, show the statistics of the packets received by the CPU
of a specific line card by using the following commands:
Ruijie# show cpu-protect slot slot_id
Show the packets received by the CPU of a
specific line card.
slot_id: slot ID
The following example shows the CPU protection information of the line card in
slot 2.
Ruijie(config)# show cpu-protect slot 2
Type Pps Total Drop
------------ --------- --------- ---------
arp 200 200 15
bpdu 200 8 0
dhcp 200 0 0
gvrp 200 0 0
ipv6-mc 200 0 0
igmp 200 0 0
ospf 200 0 0
pim 200 0 0
To Next Page
Loading...
