Configuration Guide System Upgrade Configuration
Write executable file install_lc_200e0020.bin to file system.
Checking file, please wait for a few minutes ....
Check file success.
Upgrade file install_lc_200e0030.bin succeed.
Upgrading file install_lc_20070010.bin ...
Write executable file install_lc_20070010.bin to file system.
Checking file, please wait for a few minutes ....
Check file success.
Upgrade file install_lc_20070010.bin succeed.
Installation process finished successfully ...
The system will reset automatically upon completion of installation:
SYS-5-RESTART: The device is restarting. Reason: Upgrade product !.
After entering into the main program, the master management board will
synchronize new-version program image to line cards:
*Apr 1 06:11:30: %7: Card in slot [1] CPU 0 need to do version
synchronization ...Current software version :
*Apr 1 06:11:30: %7: BOOT VERSION: 10.4.63238
*Apr 1 06:11:30: %7: CTRL VERSION: 10.4.63967
*Apr 1 06:11:30: %7: MAIN VERSION: 10.4.63967
*Apr 1 06:11:30: %7: Need update to software version :
*Apr 1 06:11:30: %7: BOOT VERSION: 10.4.59831
*Apr 1 06:11:30: %7: CTRL VERSION: 10.4.59831
*Apr 1 06:11:30: %7: MAIN VERSION: 10.4.61477
*Apr 1 06:11:41: %7: Install package transmission begin, wait please ...
*Apr 1 06:11:41: %7: Transmitting install package file to slot [1] ...
*Apr 1 06:11:41: %7: Transmitting file install_lc_20070010.bin;
*Apr 1 06:12:02: %7: Transmitting install package file to slot [1] OK ...
*Apr 1 06:12:02: %7: Install package transmission finished, system will reset
cards ...
*Apr 1 06:12:03: %7: Reset card in slot [1]
*Apr 1 06:12:03: %7: Software installation is in process, wait please ...
*Apr 1 06:12:03: %7: Installing, wait please !
*Apr 1 06:12:04: %OIR-6-REMCARD: Card removed from slot 1, interfaces disabled.
To Next Page
Loading...
