Ruijie RG-S2900G-E Series - Page 7

Configuration Guide Command Line Interface Configuration
Command
mode
Access
method
Prompt
Exit or enter the next mode
Remark
User EXEC
Log in.
Ruijie>
Enter command exit to quit
this mode.
Enter command enable to
enter the privileged EXEC
mode.
Used for
basic test
and
showing
system
informatio
n
Privileged
EXEC
In the user
EXEC mode,
enter
command
enable .
Ruijie#
To return to the user EXEC
mode, enter command
disable.
To enter the global
configuration mode, enter
command configure.
Verify
settings.
This mode
is
password-
protected.
Global
configuratio
n
In the
privileged
EXEC mode,
enter
command
configure
terminal.
Ruijie
(config)
#
To return to the privileged
EXEC mode, enter
command end or exit or
press Ctrl+C.
To access the interface
configuration mode, enter
command interface with an
interface specified.
To access the VLAN
configuration mode, enter
command vlan vlan_id.
In this
mode, you
can
execute
command
s to
configure
global
parameter
s
influencing
the whole
switch.
Interface
configuratio
n
In the global
configuration
mode, enter
command
interface.
Ruijie
(config-i
f)#
To return to the privileged
EXEC mode, enter
command end or press
Ctrl+C. To return to the
global configuration mode,
enter command exit.
Moreover, you need specify
an interface in the interface
command.
Configure
various
interfaces
of the
equipment
in this
mode.
Config-vlan
(Vlan Mode)
In the global
configuration
mode, enter
command
vlan vlan-id.
Ruijie
(config-
vlan)#
To return to privileged EXEC
mode, enter command end
or press Ctrl+C.
To return to the global
configuration mode, enter
command exit.
Configure
VLAN
parameter
s in this
mode.