Ruijie RG-S2900G-E Series - Page 733

Configuration Guide NFPP Configuration
Ruijie# show nfpp dhcp-guard summary
（Format of column Rate-limit and Attack-threshold is per-src-ip/per-src-
mac/per-port.）
Interface Status Isolate-period Rate-limit Attack-threshold
Global Enable 300 -/5/150 -/10/300
G 0/1 Enable 180 -/6/- -/8/-
G 0/2 Disable 200 -/5/30 -/10/50
Maximum count of monitored hosts: 1000
Monitor period：300s
Note
Field
Description
Interface
Global refers to the global configuration.
Status
Enable/disable the arp-guard.
Rate-limit
In the format of source IP address-based
rate-limit threshold / source MAC
address-based rate-limit threshold /
port-based rate-limit threshold.
Attack-threshold
In the same format of the Rate-limit.
-
No configuration.
Showing monitored host configuration
Command
Function
Ruijie# show nfpp dhcp-guard hosts
statistics
Show the dhcp-guard hosts statistics,
including total host amount, isolated
host amount and non-isolated host
amount.
Ruijie#show nfpp dhcp-guard hosts [vlan
vid] [interface interface-id] [mac-address]
Show the isolated hosts information.
show nfpp dhcp-guard hosts vlan
vid: Show the isolated hosts in a VLAN.
show nfpp dhcp-guard hosts [vlan
vid] [interface interface-id]: Show the
isolated hosts on a interface in a VLAN.
show nfpp dhcp-guard hosts [vlan
vid] [interface interface-id]
[mac-address]: Show the isolated
hosts. Use the MAC address to identify
the hosts.