Ruijie RG-S2900G-E Series - Page 800

Configuration Guide QoS Configuration
Command
Description
show mls qos rate-limit [interface interface]
Show the rate limit of [port]
Ruijie# show mls qos rate-limit
Interface GigabitEthernet 0/4
rate limit input bps = 100 burst = 100
Showing the policy-map interface
You can show the configuration of port policy map by performing following steps
Command
Function
show policy-map interface interface
Showing the configuration of (port) policy
map
Ruijie#show policy-map interface f0/1
FastEthernet 0/1 input (tc policy): pp
Class cc
set ip dscp 22