Configuration Guide SEM Configuration
result in errors. Setting nonexistent local variable will automatically generate user local
variable.
SEM intelligent management server management
SEM intelligent management server provides user with a management interface through
which the user can view SEM operational information and carry out management. The
user can view various information of SEM, mainly including:
Display the types of detectors supported.
Display the version of intelligent management server and respective event
detectors.
Display the policies configured and submitted by the user.
Display the policies being executed.
Display the policies which are not executed.
Display historic events.
Display the counter defined currently.
Display the SEM global variable defined currently.
The user can manage the policies being executed during the operation of SEM intelligent
management server:
Suspend and resume the scheduler of SEM policy.
Hold and release a specific policy or policies in the specified class.
Adjust the scheduling priority of a specific class.
Force to end a specific policy, a specific class or all policies.
Configure SEM
SEM configuration will be introduced through the following:
Prerequisites
Necessary information
How to configure policy
Prerequisites
Certain prerequisites are required in order to use SEM. Most prerequisites will be needed
to execute policy actions:
1. Syslog must be enabled by executing "logging" command before configuring
Syslog actions.
2. Before switching to the standby engine, a normal standby engine must have
been configured on the device.
To Next Page
Loading...
