Configuration Guide SEM Configuration
Ruijie(config)# smart manager applet
applet-name [class class-options]
Enter SEM configuration mode.
applet-name is the specified policy name.
class parameter specifies the policy
class.
Ruijie(SEM-applet)#rollback
Roll back policy configurations
Configuration example:
# Roll back the configurations of "policy_a".
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# smart manager applet policy_a
Ruijie(SEM-applet)# rollback
The user can roll back policy configuration under two circumstances:
newly configured policy which hasn't been submitted yet; policy has been
submitted and registered, but the changes to policy has not been
submitted.
In the aforementioned two cases, the user can execute "rollback"
command to roll back policy configurations which haven't been submitted
yet.
Configure multiple events
Enter privileged EXEC mode
Ruijie# configure terminal
Enter global configuration mode
Ruijie(config)# smart manager applet
applet-name [class class-options]
Enter SEM configuration mode.
applet-name is the specified policy name.
class parameter specifies the policy
class.
Ruijie(sem-applet)# event tag event-name
[correlate {andnot | and | or}] syslog
pattern regular-expression [priority
priority-level] [occurs num-occurrences]
[period period-value] [skip {yes|no}]
Ruijie(sem-applet)# event tag event-name
[correlate {andnot | and | or}] syslog
pattern regular-expression [priority
priority-level] [occurs num-occurrences]
[period period-value] [skip {yes|no}]
To Next Page
Loading...
