Configuration Guide Web-based Configuration
2) Setting the port security function
Select the port to be configured. If the port security function is enabled on the port, the Enable
port security option button is selected. Otherwise the Disable port security option button is
selected. If the port security function is enabled, the following figure shows the security port
information.
3) Modifying the information of the security port
In order to modify the information of the security port, tick the check box of the port to be
modified and click Modify to display the Modify security port page as shown below.
Figure 1-22 Security port modification
After modifying related parameters, click Save to validate the configuration. If the port type is
dynamic, the type of the modified port changes to static.
ARP Detection Setting
Use the ARP Detection Setting menu item to enable the function.
ARP detection setting page
Figure 1-23 ARP detection setting
Configuration Description:
To Next Page
Loading...
