Configuration Guide Web-based Configuration
Figure 1-25 Configuring standard IP address access list
Configuration description:
Rule: Select the filtering rule from the drop-down list. There are Disable and Enable filtering
rules.
List ID (name): Enter the standard access list ID or name.
IP address: If you select the Specify IP address range option button, enter the correct IP
address. The wildcard mask textbox is optional. After the configuration is complete, click Save
to validate the configuration.
In order to configure the extended IP address access list, click Configure extended IP
address access list option button. The following figure is the interface of configuring extended
IP address access list.
To Next Page
Loading...
