Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring DHCPv6
Configuration
Description and Command
(Optional) It is used to allocate addresses.
iana-address prefix
Configures the address prefixes to be allocated
on the DHCPv6 server.
(Optional) It is used to allocate prefixes.
prefix-delegation
Configures prefixes of statically bound addresses
on the DHCPv6 server.
prefix-delegation pool
Configures the DHCPv6 server to allocate
prefixes from a local prefix pool.
ipv6 local pool
Configures a local IPv6 prefix pool.
(Optional) It is used to allocate configuration parameters.
dns-server
Configures the DNS server on the DHCPv6
server.
domain-name
Configures the domain name of the DHCPv6
server.
option52
Configures the IPv6 address of the CAPWAP AC
on the DHCPv6 server.
(Mandatory) It is used to enable the DHCPv6 server service.
ipv6 dhcp server
Enables the DHCPv6 server service on an
interface.
Configuring the DHCPv6
Relay
(Mandatory) It is used to enable the DHCPv6 relay agent service.
ipv6 dhcp relay destination
Configures the DHCPv6 relay agent function.
Configuring the DHCPv6
Client
(Mandatory) It is used to request addresses or prefixes.
ipv6 dhcp client ia
Enables the DHCPv6 client and requests IANA
addresses.
ipv6 dhcp client pd
Enables the DHCPv6 client and requests
address prefixes.
(Optional) It is used to enable a host that receives an RA message to request stateless
service through the DHCPv6 client.
ipv6 nd other-config-flag
Sets the O flag in the RA message on the device
that sends the RA message so that the host that
receives the RA message can request stateless
service through the DHCPv6 client.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English