Ruijie RG-WLAN Series

Configuration Guide Configuring Web Authentication
Configuration
Description and Command
web-auth accounting jitter-off
Configures the jitter-off duration. (Use the
no form of this command to disable this
function.)
web-auth user-flow-control
by-radius-class {format-16bytes |
format-32bytes}
Configures user-based flow control.
Configuring the Default Webauth
Template
(Optional) It is used to configure the authentication methods applicable to EG
products.
web-auth webauth-type {internal |
external name }
Configuring the Portal
Communication Port
(Optional) It is used to configure the port (source port) used for the communication
between the NAS and portal server.
ip portal source-interface interface-type
interface-num
Specifies the port used for the
communication between the NAS and
portal server.
Configuring a
NDKEY-Compatible Webauth
URL
(Optional) It is used to configure the Webauth URL used in Web authentication to
support the Shanghai NDKEY system.
web-auth dkey-compatible url-parameter
string
Configures a NDKEY-Compatibility
compatible between the Shanghai NDKEY
system and redirection Webauth URL.
Enabling NAT for Ruijie iPortal
Web Authentication
(Optional) It is used to configure Ruijie iPortal Web Authentication to support
network address translation (NAT).
iportal nat enable
Enables NAT for Ruijie iPortal Web
Authentication.
Configuring the iPortal HTTP
Retransmission Times
(Optional) It is used to configure the iPortal HTTP retransmission times.
iportal retransmit count
Configures the iPortal HTTP
retransmission times.
Configuring Service Selection in
Ruijie iPortal Web Authentication
(Optional) It is used to configure the service type used by Ruijie iPortal Web
Authentication.
iportal service [ internet internet-name]
[ local local-name ]
Configures the service type used by Ruijie
iPortal Web Authentication.
Configuring the Accounting
Method List of Web
Authentication
(Optional) It is used to configure an accounting method based on the template.
web-auth accounting v2 { default | name}
Configures an accounting method based
on the template.