Ruijie RG-WLAN Series

Configuration Guide Configuring Web Authentication
Configuration
Description and Command
Updating Online User Information
web-auth update-interval { seconds }
Configures the interval for updating online
user information.
Configuring Portal Detection
(Optional) It is used to detect the availability of the portal server. If it is not available,
the services are switched to the standby portal server. This function must be used
together with portal standby function.
web-auth portal-check [interval intsec
[timeout tosec] [retransmit retries]
Configures the portal server detection
interval, timeout period, and timeout
retransmission times.
web-auth ping [interval minutes] [retry
times]
Configures the ping detection interval and
timeout retransmission times.
Configuring Portal Escape
(Optional) It is used to allow new clients to access the Internet without authentication
when the portal server is not available.
web-auth portal-escape
Configures portal escape.
Enabling DHCP Address Check
(Optional) It is used to check whether the IP address of a client is allocated by the
DHCP server. If not, the client's authentication request is denied.
web-auth dhcp-check
Checks whether the IP address of a client
is assigned by the DHCP server.
Disabling Link Detection
(Optional) It is used for jitter-off purposes to prevent the deletion of a client's Web
authentication entry when the link of the client is disconnected, so that the client can
access the Internet again without authentication.
no web-auth sta-leave detection
Disables link detection.
Disabling Portal Extension
(Optional) It is used to disable portal extension in order to interwork with CMCC
standard portal server. Portal extension must be enabled for interworking with Ruijie
portal server software.
no web-auth portal extension
Disables portal extension.
Configuring a Whitelist and
Blacklist
(Optional) It is used to configure a blacklist to prevent authenticated clients from
accessing some network resources, and a whitelist to allow unauthenticated clients
to access some network resources.
web-auth acl{black-ip ip|black-port
port|black-url name|white-url name}
Configures a whitelist and blacklist.
Configuring Jitter-off Accounting
(Optional) It is used to configure whether the jitter-off duration is included into the
online duration, in order to improve accounting precision. The jitter-off duration
depends on the jitter-off configuration of a specific product.