How to Use the Bar Code Reader, and It's Function (Options)
2-38
7. Once the bar code of the solution has been read, the
information of the solution is displayed on the screen, as
with the kit.
8. If the information displayed on the screen is correct, set
the station containing the special solution as the specified
station in the instrument.
The special solution pouch is easy to deform, so use
one hand to orient its solution outlet toward the
station. Also, squeezing the pouch causes the solution
to gush out, so gently hold the pouch with the other
hand.
9. Once the solution has been set, touch the Register
button. Touch the Register button and then touch the Yes
button in the figure below, and the entered bar code
information will be saved.
10. When the Yes button is touched, the station to which the
bar code information has been set turns blue. In the case
of a kit, read all solutions constituting the kit and then
touch the Register button in the bottom right of the
screen, to complete the solution saving process.
The Register button becomes selectable after all of
the solution constituting the kit have been read.
Returning to the previous screen without touching
the Register button resets the saved information.
To Next Page
Loading...
Need help?
General
