Sakura Tissue-Tek Prisma Plus - Name of each Part

1-20
Name of Each Part
[1] [2] [3] [4] [5]
[1] Cover
The cover protects the operator against exposure to dangerous chemicals without
obstructing his/her view.
[2] Door
Open this door when setting or removing tissues.
[3] Water supply strainer door
Access this area when maintaining the water supply circuit.
[4] Power switch
[5] Control panel display
A touch-panel type display for operating the instrument.
[6] External interface
It can be connected to an UPS (uninterruptible power supply), 2D bar code reader,
etc.
[7] Power-supply inlet
[8] Water supply port
Tap water is supplied to this port.
[9] Drain port
[10] Exhaust outlet
This outlet can be connected to an external exhaust duct via a special attachment.
[11] Automated coverslipper link port
Remove the port cover to connect an automated coverslipper for automated operation
encompassing staining through coverslipping.
[6]
[7]
[8]
[9]
[10]
[11]