(e)
Safety Precautions
Designation of "Instrument Control Manager"
● Operation of the instrument requires expert knowledge of the target application, method of use, and so
on. So that the instrument can be used correctly and safely, designate a "Instrument Control Manager."
● When the instrument is delivered, the Instrument Control Manager should receive explanation on the
handling of the instrument directly from our sales representative.
* Before using the instrument, read "Safety Precautions" to ensure the correct use of the instrument.
* The cautionary instructions provided herein are intended to ensure that the instrument will be used
safely in a manner preventing operator from injury and property damage.
* In this manual, instructions pertaining to different levels of potential hazards are classified as and
indicated under , , and .
The definition of each hazard is defined below.
pertains to a potential hazard where failure to observe the specified instruction may result in death or
serious injury of the operator or other person.
pertains to a potential hazard where failure to observe the specified instruction may result in a serious
injury of the operator or other person.
pertains to a potential hazard where failure to observe the specified instruction may result in damage to
this instrument or other property, or affect the process results.
pertains to an item to pay attention to or other useful information.
* The symbols used on the labels attached to the instrument are explained.
The labels bearing one of the following symbols provide particularly important information you must
know in order to ensure safety of the operator, improve work efficiency and protect the instrument from
damage. Be sure to check these labels and understand the specified instructions before commencing
your work.
A label bearing this symbol specifies an action that must be taken. Always follow the instructions.
A label bearing this symbol specifies a prohibited item. Always follow the instructions.
A label bearing this symbol specifies a precaution. Wrong handling against the instruction may
potentially expose the operator to danger or result in damage to the instrument. Always follow
the instructions.
A label bearing this symbol is provided near a high-temperature area. Exercise caution against
burns caused by high temperatures.
To Next Page
Loading...
Need help?
General
