Sakura Tissue-Tek Prisma Plus User Manual

Installation Method
1-6
Removing the Securing Members Inside the Instrument
1. Remove the cushion materials sandwiched between the robot arm and the rail.
2. Remove the tape securing the holder, and remove the cushion materials inserted underneath the
holder.
3. Remove the reinforcing cushion materials on the tray, and take out the cushion foam sheet and PP
band.
4. Remove all 3-position and 4-position reservoir trays stored in the system, and remove the tape
securing the cushion foam sheet and the water supply nozzle.
Tape
Cushion material
Cushion material
Cushion material
Cushion material
Cushion material
PP band
Cushion foam sheet
Cushion foam sheet
Sheet securing the water supply nozzle

Sakura Tissue-Tek Prisma Plus Specifications

General

Brand	Sakura
Model	Tissue-Tek Prisma Plus
Category	Laboratory Equipment
Language	English