Sakura Tissue-Tek Prisma Plus User Manual

Basics
1-29
Relationship of Solution Configurations and Station Numbers
This section explains the relationship of solution configurations and station numbers shown on the screen.
The link station is available only when the instrument is connected to an automated coverslipper. It cannot
be used if an automated coverslipper is not connected.
● Arrangement of small solution stations
The small solution stations can be arranged "without special solution stations" or "with special solution
stations." In both cases, the solution configurations and number of stations are the same. However, the
number of stations and station numbers vary depending on whether some stations are used as wash
stations or solution stations.
Row 4
Station 1
Station 3
Station 5
Station 7
Station 8
Station 9
Station 10
Station 13
Station 2
Station 4
Station 6
Station 14
Row 3
Station 15
Station 17
Station 19
Station 21
Station 23
Station 25
Station 27
Station 29
Station 16
Station 18
Station 20
Station 22
Station 24
Station 26
Station 28
Station 30
Row 2
Station 31
Station 33
Station 35
Station 37
Station 39
Station 41
Station 43
Station 45
Station 32
Station 34
Station 36
Station 38
Station 40
Station 42
Station 44
Station 46
Frontmost row
Station 53
Station 47
Station 48
Station 49
Station 50
Station 51
Station 52
Figure Arrangement with/without Special Solution Stations
Fixed station numbers are assigned to the start stations (S1 to S3), end stations (linked) (E1-1 to E1-5),
end stations (not linked) (E2-1 to E2-5), wash stations (W1 to W4), drying stations (D1A, D1B, D2A, D2B),
heating stations (H1, H2) and link station (LINK). The tables below specify the identification number of
each station attribute and the corresponding station number.
* S2 and S3 can also be set as solution stations.
End station (linked)
E1-1
E1-2
E1-3
E1-4
E1-5
PE station
Without special solution stations
Station 47
Station 48
Station 49
Station 50
Station 51
The rightmost end station is
selected as the PE station
With special solution stations
* E1-2 to E1-5 can also be set as solution stations.
End station (not linked)
E2-1
E2-2
E2-3
E2-4
E2-5
Without special solution stations
Station 47
Station 48
Station 49
Station 50
Station 51
With special solution stations
* E2-2 to E2-5 can also be set as solution stations.
Link station
LINK
Wash station
W1
W2
W3
W4
Without special solution stations
Station 53
Without special solution stations
Station 4
Station 5
Station 6
Station 7
With special solution stations
With special solution stations
* W1 to W4 can also be set as solution stations.
Drying station
D1A
D1B
D2A
D2B
Heating station
H1
H2
Without special solution stations
Station 13
Station 14
Station 29
Station 30
Without special solution stations
Station 45
Station 46
With special solution stations
With special solution stations
* Available with the DRS-Prisma-J0S only.
Special solution station
SP1
SP2
SP3
SP4
SP5
SP6
SP7
SP8
Without special solution stations
−
-
-
-
-
-
-
-
With special solution stations
Station 21
Station 22
Station 23
Station 24
Station 25
Station 26
Station 27
Station 28
Start station
S1
S2
S3
Without special solution stations
Station 52
Station 51
Station 50
With special solution stations
* The link station can be set only when the instrument
is connected to an automated coverslipper.

Sakura Tissue-Tek Prisma Plus Specifications

General

Brand	Sakura
Model	Tissue-Tek Prisma Plus
Category	Laboratory Equipment
Language	English