Sakura Tissue-Tek Prisma Plus User Manual

Installation Method
1-15
● Installing each tray
Set each tray with the two holes provided on the outer side of the handles on both sides of the tray
(see the figure below) facing the rear. The position of each tray is shown below. Trays cannot be placed
in the positions filled with gray.
3-position reservoir tray (for standard/small solution reservoirs)
4-position reservoir tray (for standard/small solution reservoirs)
Special stain reservoir tray (for special stain solution reservoirs)
Hole
Hole
Hole
Hole
Hole
Hole
Back
Near side
Back
Near side
Back
Near side

Sakura Tissue-Tek Prisma Plus Specifications

General

Brand	Sakura
Model	Tissue-Tek Prisma Plus
Category	Laboratory Equipment
Language	English