To Next Page

To Previous Page

Quick-Reference Guide to All Menu Code Settings

This list of menu parameters compiled from Part IV gives you a quick-reference guide to the code settings.

lf you need to change any of the factory settings, we recommend that you enter these changes along with the date and, if

necessary, your Initials in the column headed by "Changes."

Program Application -

- Reference for % and Counting

Code Changes Code Changes

1. weigh. range 2 1 1 No change 2 3 1

2. weigh. range 2 1 2 5, 10, 20, ... 2 3 2 *

3. weigh. range 2 1 3 * in incr. of 1 2 3 3

Counting 2 1 4

Weighing in % 2 1 5 Store Parameter for Ref. Weight

Code Changes

Program Application - - Acc. to int. resol. 3 5 1

Code Changes Acc. to disp. acc. 3 5 2 *

No function 2 2 1

Tare memory 2 2 2 readout in Percent

Over/under – net 2 2 3 Code Changes

Over/under – dif 2 2 4 Without decimal 3 6 1

Internal calibration 2 2 5 * 1 decimal 3 6 2 *

Calibration test 2 2 6 2 decimals 3 6 3

3 decimals 3 6 4

Clear Function - -

Code Changes

Clear all keys 2 4 1 *

Clear Æ 2 4 2

Clear or 2 4 3

* = Factory setting

Sartorius mc1 User Manual

Questions and Answers: