Special Codes
are output only if the menu code 6 1 1, 6 1 4 or 6 1 5 is set (see "Part III: Data Output Parameters").
Special status-dependent codes
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * * * A B * * * * * * * CR LF
The following Status codes are Output for "A B":
* * :
Tare
H * :
Overload
C * :
Calibrate *)
L * :
Underload
– – :
All numerals shown in stable readout
Special error-dependent codes
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * E R R * X Y Z * * * * CR LF
X = *, 0, 1, or 2 as a one-place error code
Y Z = two-place error index code
*) The displayed Status code "C" will also be Output when a print command is received.
To Next Page
Loading...
