28
Data Printout/Record (menu code 8 14 3 only)
To have a record of data printed out, perform the following:
—
Output printout heading and first value with the key (after you have turned on the balance or cleared a function
with "
")
—
Output additional data with the key
—
To end printout generation and recording of data, press the key (generation of a GLP/GMP printout is also ended
when a calibration or linearization Operation is started)
During data printout, the print symbol
appears in the display on the balance.
The printout can have the following lines:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MC1 – Sartorius
: Balance family and manufacturer
Model RC210P
: Balance model
S / N 10205496
: Serial no. of the balance
Id 4-32-1
: ID No. (e.g., for identifying a workstation/operator)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Date : 30–Sep–91
: Current date
Start : 10:05:30
: Time at which the application started
Ser. :
: Field for entering the project number
N + 4.66490 g
: Measured values/weights
N + 14.65486 g
N + 53.45350 g
End : 10:05:45
: End of application
Name :
: Field for signature of the operator responsible
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To Next Page
Loading...
