30
The printout can have the following lines:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MC1 – Sartorius
: Balance family and manufacturer
Model RC210P
: Balance model
S / N 10205496
: Serial no. of the balance
Id 4-32-1
: ID No. (e.g., for identifying a workstation/operator)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Date : 30–Sep–91
: Current date
Start : 10:05:30
: Time at which the application started
Ser. :
: Field for entering the project number
Lim + 1.0 %
: Reference data (in this case, "tolerance and target
Setp + 42.38903 g
weight" - see "Part IV: Application Programs"
pRef + 100 %
in addition)
Wxx% + 42.38903 g
Prc + 100.6 %
: Value meas. (in this case, "calculated percentage")
End : 10:05:45
: End of application
Name :
: Field for signature of the operator responsible
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To Next Page
Loading...
Need help?
General