34
Quick-Reference Guide to All Menu Code Settings
This list of menu parameters compiled from Part II gives you a quick-reference guide to the code settings.
lf you need to change any of the factory settings, we recommend that you enter these we recommend that you enter these your
Initials in the column headed by "Changes."
Balance Operation
Ambient conditions Code Changes Stab. symbol delay Code Changes
Very stable 1 1 1 None 1 4 1
Stable 1 1 2 * Short 1 4 2 *
Unstable 1 1 3 Long 1 4 3
Very unstable 1 1 4 Extremely long 1 4 4
Weighing/filling Code Changes Tare parameter Code Changes
Standard weighing 1 2 1 * At many time 1 5 1
Filling 1 2 2 At stability 1 5 2 *
Stability range Code Changes Auto Zero Code Changes
0,25 digit 1 3 1 On 1 6 1 *
0,5 digit 1 3 2 Off 1 6 2
1 digit 1 3 3
2 digits 1 3 4 *
4 digits 1 3 5
8 digits 1 3 6
* = Factory setting
** = Setting not available for balances with 0.01 mg readability
To Next Page
Loading...
Need help?
General