36
Calibration and Linearization Functions
External calibration Code Changes Multiple calib. mode Code Changes
Accessible 1 9 1 * Off 1 14 1 *
Access denied 1 9 2 On 1 14 2
Internal calibration Code Changes Auto calibration Code Changes
Accessible 1 10 1 * Off 1 15 1
Access denied 1 10 2 Off (with cal. status) 1 15 2
Auto calibration 1 15 3 *
Calibration test Code Changes Auto cal. + linearization 1 15 4
Accessible 1 11 1 *
Access denied 1 11 2 Auto cal. after stability Code Changes
1 minute 8 9 1 *
External linearization Code Changes 2 minutes 8 9 2
Accessible 1 12 1 *
Access denied 1 12 2
Internal linearization Code Changes
Accessible 1 13 1 *
Access denied 1 13 2
Utilities
Data output parameter Code Changes Print interval after: Code Changes
Without stability 6 1 1 1 display update 6 3 1 *
After stability w/storage 6 1 2 * 2 display updates 6 3 2
After stability w/o storage 6 1 3 5 display updates 6 3 3
Auto. without stab. 6 1 4 10 display updates 6 3 4
Auto at stability 6 1 5 20 display updates 6 3 5
50 display updates 6 3 6
Data ID codes Code Changes 100 display updates 6 3 7
Without 7 2 1 *
With 7 2 2 Auto taring after data output Code Changes
Off 6 4 1 *
Auto data output Code Changes On 6 4 2
Stop with key 6 2 1
Not stoppable 6 2 2 *
* = Factory setting
To Next Page
Loading...
Need help?
General