Commissioning
PR 5220 Instrument Manual
EN-42 Sartorius
Temporarily connected PCs must have the following network adaptor properties (DHCP/DNS automatic):
PR 5220 can be operated only, if a notebook/PC is connected!
For commissioning, the first network contact is possible only by finding the IP address/subnet mask under
DHCP ’on’ (factory setting) automatically.
4.3.2.1 MAC ID
The MAC ID or (6-digit) hardware address, e.g. 00-90-6C-6B-6A-5E is a unique number for identification of
any network adaptors.
A label with the complete MAC ID is fitted outside the instrument.
Due to the last 3 bytes, the initialized host name is always unique.
To Next Page
Loading...
