SATO WS4 Series - ESC+2 D12 Micro PDF

96
2D Code
Available for
WS4 series
ESC+2D12 Micro PDF
ESC+2D12
Hex code
ESC
2D12
Parameter
<1B>16
<32>16<44>16<31>16<32>16
,aa,bb,c,dd(,e)
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies Micro PDF.
[Format] (Setting portion)
<2D12>,aa,bb,c,dd(,e)
●Parameter
a Minimum module width = Valid range : 01 to 09 (dots)
b Minimum module height = Valid range : 01 to 24 (dots)
c Code words per line (Cols) = Valid range : 1 to 4
d Rows per symbol (Rows) = Valid range : 2 digits
e Binary mode (Omissible) = 0 : Normal (when omitted)
1 : Binary mode
[Format] (Data portion)
<DN>mmmm,n~n : When Binary mode is set to [1]
<DS>n~n : When Binary mode is set to [0]
●Parameter
m Quantity of data = Valid range : 0001 to 0366 (bytes)
n Print data = Data
[Coding Example] Module width: 02 dots, Module height: 04 dots
Code words per line: 1, Rows per symbol: 14
<A>
<V>100<H>200<2D12>,02,04,1,14
<DN>0010,0123456789
<Q>2
<Z>
[Note]
1. Rows per symbol is subject to the number of data code word per line. See table in next page for symbol size and data quantity.
Micro PDF