SATO WS4 Series - Using the SATO WS4 Printer Utility; Menu Bar

56
Font
Available for
WS4 series
ESC+WB WB Font
ESC+WB
Hex code
ESC
WB
Parameter
<1B>16
<57>16<42>16
an~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Font with the basic size of: width 18 dots, height 30 dots is specified.
[Format]
<WB>an~n
● Parameter
a [Smoothing] = 0: Smoothing OFF
n [Print data] = Data
[Coding example]
<A>
<V>100<H>200<P>2<L>0304
<WB>0ABCDE
<Q>2
<Z>
[Notes]
1. The WB font only allows the setting of a fixed pitch.
2. If setting the smoothing option, and the expansion <L> command is set to 1 or 2, the smoothing function will be ignored.
3. This font is to obtain compatibility with old printer models and shall not disclose to the users.
[Valid commands]
Print position
<V>
<H>
Modification
<P>
<L>
<%>
<F>
<&>
</>
<0>
<WD>
Barcode
<D><d>
<BL><d>
WB Font
(Basic size 18x30 dots)