SATO WS4 Series - Parameter Setting - Sensor and Feed Key Configuration; Parameter Setting - Head Check and Calibration

63
Barcode
Available for
WS4 series
ESC+B Barcode (Ratio 1:3)
ESC+B
Hex code
ESC
B
Parameter
<1B>
16
<42>
16
abbcccn~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies a barcode with a ratio of 1:3 between narrow bar and wide bar.
[Format]
<B>abbcccn~n
● Parameter
a [Barcode type] = Refer to table below
b [Narrow bar width] = Valid range : 01 to 12 dots
c [Barcode height] = Valid range : 001 to 999 dots
n [Print data] = Data
Barcode type (Depending on the barcode type, there might be the case that there is no ratio specified for the module draw up)
a
Barcode type
Information
Ratio
0
CODABAR (NW-7)
Always include start and stop characters in print data.
Start/stop characters are [A, B, C, D, E, N, T, a, b, c, d, e, n, t]
Example) In case of barcode data [123]: [A123A]
Inter-character pitch of barcode is valid.
For print data specifications, refer to table of CODABAR (NW-7) code
1:3
1
CODE39
Always include start and stop characters in print data.
Start/stop characters are [*]
Example) In case of barcode data [12345]: [*12345*]
Inter-character pitch of barcode is valid.
For print data specifications, refer to table of CODE39 code
1:3
2
ITF
Put the print data in even digit numbers
If putting the print data in odd digit numbers “0” will be added on the head of the print
data.
For print data specifications, refer to table of ITF code
1:3
3
JAN/EAN-13
This barcode does not include guard bars or human-readable characters
For print data specifications, refer to table of JAN/EAN13 code
Fixed
4
JAN/EAN-8
This barcode does not include guard bars or human-readable characters
For print data specifications, refer to table of JAN/EAN8 code
Fixed
5
Industrial 2of5
Inter-character pitch of the barcode is valid
For print data specifications, refer to table of Industrial 2of5 code
1:3
6
Matrix 2of5
Print data can be specified up to 13 digits
For print data specifications refer to table of Matrix 2of5 code
1:3
A
MSI
Print data input is possible for up to 13 characters
For print data specifications, refer to table of MSI code
Fixed
C
CODE93
Refer to CODE93 <BC>
Fixed
E
UPC-E
Specify 6-digit numbers for print data
For print data specifications, refer to table of UPC-E code
Fixed
F
BOOKLAND
Refer to BOOKLAND specifications <BF>
Fixed
G
CODE128
(128A, 128B, 128C)
Refer to CODE128 (128A, 128B, 128C) <BG>
Fixed
H
UPC-A
This barcode does not include guard bars or translation
For print data specifications, refer to table of Interleaved UPC-A code
Fixed
I
GS1-128（UCC/EAN128）
Refer to GS1-128 (UCC/EAN128) <BI>
Fixed
P
POSTNET
Refer to POSTNET <BP>
Fixed
Barcode (Ratio 1:3)