SATO WS4 Series - ESC+A1 Media Size

173
System
Available for
WS4 series
ESC+A1 Media Size
ESC+A1
Hex code
ESC
A1
Parameter
<1B>16
<41>16<31>16
aaaabbbb
Default setting
None
Persistence of the
command
When printer is powered off
Set parameter will not be retained
Validity in a job
Retained until next valid setting
Validity after a job
Retained until next valid setting
[Function]
Specifies media size.
[Format]
<A1>aaaabbbb (a, b: Fixed number of digits)
<A1>VaaaaaHbbbb (a, b: Variable number of digits)
●Parameter
a [Label height] = see table in next page
b [Label width] = see table in next page
[Coding Example 1]
<A>
<A1>08000240
<Z>
[Coding Example 2]
<A>
<A1>V800H240
<Z>
[Notes]
1. This command is useful when you use a label in a smaller size than the print head width, and need to optimize the base reference point accordingly.
2. Backing paper should be included in the label size.
[Valid range]
Model
Label width (dot)
Label height (dot)
WS408DT/TT
1 to 832
1 to 7992
WS412DT/TT
1 to 1248
1 to 11988
30 mm × 100 mm
Label
100 mm
800 dots
(1200 dots)
300 mm
2400 dots
(3600 dots)
30 mm
240 dots
( 360 dots)
104mm
832 dots
(1284 dots)
1
1
Base reference point
FEED
The values in ( ) are for 12 dots/mm
Media Size