SATO WS4 Series - ESC+PR Release Proportional Pitch

20
Modification
Available for
WS4 series
ESC+PR Release Proportional Pitch
ESC+PR
Hex code
ESC
PR
Parameter
<1B>
16
<50>
16
<52>
16
None
Default setting
None
Persistence of the
command
When printer is powered off
Command settings will not be retained
Validity in a job
Command set are valid until setting is changed
Validity after a job
Will be retained after the job
[Function]
Releases proportional pitch
[Format]
<PR>
[Coding example]
<A>
<PR>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Notes]
1. The default setting is set to [Proportional pitch].
[Valid commands]
WS4 series
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<RD>
<$=>
Modification
Release Proportional Pitch