SATO WS4 Series - ESC+C Reprint

182
System
Available for
WS4 series
ESC+C Reprint
ESC+C
Hex code
ESC
C
Parameter
<1B>16
<43>16
None
Default setting
None
Persistence of
the command
When printer is powered off
Set Parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies to reprint the last label.
[Format]
<C>
[Coding Example]
<A>
<C>
<Z>
[Note]
1. Since the last print data will be cleared by powering off, reprint operation will not be available after the printer rebooted.
[Tips]
1. In case the print data contains sequential numbering by command <F>, the same number will be printed.
Reprint