SATO WS4 Series - Non Printable Area; Interface; Optional Interface; Accessories

84
Barcode
Available for
WS4 series
ESC+BP POSTNET
ESC+BP
Hex code
ESC
BP
Parameter
<1B>16
<42>16<50>16
n~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies POSTNET barcode.
[Format]
<BP>n~n
●Parameter
n = Print data (See POSTNET Code table in next page)
* Follow the rule of the data length for each format.
- 5 digits (for Postnet-32 format)
- 6 digits (for Postnet-37 format)
- 9 digits (for Postnet-52 format)
- 11 digits (for Postnet-62 Delivery Point format)
[Coding Example] Postal code 11 digits : 01234567890
<A>
<V>100<H>200
<BP>01234567890
<Q>2
<Z>
[Notes]
1. Data length other than 5, 6, 9, and 11digits will be invalid.
2. Only numeric can be specified for print data.
POSTNET