SATO WS4 Series - Load Media

21
Modification
Available for
WS4 series
ESC+% Rotation
ESC+%
Hex code
ESC
%
Parameter
<1B>
16
<25>
16
a
Default setting
a=0
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Set parameter will be retained until next valid setting
Validity after a job
Set parameter will be the default value for the next job<A>
[Function]
Rotates font / barcodes in a counterclockwise direction.
[Format]
<%>a
● Parameter
a [Rotation direction] = 0 : Parallel 1 (0 deg) 1 : Serial 1 (90 deg)
2 : Parallel 2 (180 deg) 3 : Serial 2 (270 deg)
[Coding example] Font rotation: Parallel 2, Barcode rotation: Serial 1
<A>
<%>2
<V>100<H>400<P>3<L>0403<OA>ABCD
<%>1
<V>400<H>200<BD>103160*123*
<Q>2
<Z>
[Notes]
1. The vertical print position and the horizontal print position are absolute values from the origin.
2. If the parameter setting is outside of the specification (4 to 9), the command will get an error. If non numeric values included, the print
will be executed with 0 degree rotation.
3. There is a possibility of incorrect print, when printing barcodes in serial 1 or serial 2 mode. Confirm print-out in those cases. Reduce
print speed when printing in serial 1 or serial 2 mode.
[Valid commands]
WS4 series
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<U>
<S>
<M>
<WB>
<WL>
<OA>
<OB>
<RD>
<$=>
Barcode
<B>
<BC>
<BG>
<BI>
<BF>
<BP>
<D>
<D><d>
<BD>
<BT>
<BW>
2D code
<BK>
<BQ>
<BV>
<BX>
<2D10>
<2D12>
<2D20>
<2D30>
<2D31>
<2D50>
<2D51>
Graphic
<G>
<GM>
<GP>
System
<E>
Modification
Parallel 1 (0 deg)
Parallel 2 (180 deg)
Serial 1(90 deg)
Serial 2 (270 deg)
Feed direction
Origin
Origin
Origin
Origin
Feed direction
Feed direction
Feed direction
Rotation