SATO WS4 Series - ESC+FM Format Memory Card

205
Memory Card
Available for
WS4 series
ESC+FM Format Memory Card
ESC+FM
HEX code
ESC
FM
Parameter
<1B>16
<46>16<4D>16
aaaaaaaa
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies the format (initialization) of memory card.
[Format]
<FM>aaaaaaaa
● Parameter
a [User ID] = Up to 8 bytes in alphanumeric and symbols
[Coding example]
<A>
<CC>1
<FM>SATO
<Z>
[Note]
1. Make sure to specify the card slot number to be used for the <CC> command before the <FM> command.
2. The <FM> command is used for initializing a memory card and this command cannot be used in combination with other commands.
3. Care should be exercised when using this command as it destroys any data previously written to the card. SATO is not liable for any
data loss.
Format Memory Card