SATO WS4 Series - ESC+BV MAXI Code

159
2D Code
Available for
WS4 series
ESC+BV MAXI Code
ESC+BV
Hex code
ESC
BV
Parameter
<1B>16
<42>16<56>16
a,b,c,ddddddddd,eee,fff,n~n
Default setting
None
Persistence of the
command
When printer is powered off
Set Parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies to print MAXI code.
[Format]
<BV>a,b,c,ddddddddd,eee,fff,n~n
●Parameter
a [Symbol number] = Valid range : 1 to 8
b [Digit of symbol] = Valid range : 1 to 8
c [Mode] = 2 : Delivery
3 : Delivery
4 : Standard symbol
6 : for reader device only
d Postal code = Valid range : 0 to 999999999 (Mode 2)
000000 to 999999 (Mode 3)
* Mode 2 accepts max. 9 digits (numeric only)
* Mode 3 accepts 6digits fixed (only upper case for alphabet)
e Country code = Valid range : 001 to 999
f Service class = Valid range : 001 to 999
n Low priority message = Alphanumeric + symbols
[Coding Example]
<A>
<V>100<H>200
<BV>1,1,2,123456789,001,002,SAHTHA
<Q>2
<Z>
[Notes]
1. The size of the symbol printed is not subject to data volume. (Quantity of data)
2. Any other parameters specified or settings being inconsistent with each other will result in no printing.
3. In case mode [4] or [6] is selected, the data size shall be larger than 12 (bytes), otherwise the symbol can not be read by scanners.
4. Data will be received until next command header, 1BH, or maximum data size.
5. In mode2 and 3, data has following definition. See “MAXI Code data format (Mode2 and 3)” written on the page about <2D20>.
Mode
Service class
Country code
Postal code
Max. data size
Numeric
Alphanum.
2
3 digits Fixed
(Numeric only)
3 digits Fixed
(Numeric only)
Max.9digits
123
84
3
6 digits fixed(Alpha-num.)
4
Omitted
138
93
6
MAXI Code