SATO WS4 Series - Parameter Setting - Non-Standard Codes

65
Barcode
Available for
WS4 series
ESC+D Barcode (Ratio 1:2)
ESC+D
Hex code
ESC
D
Parameter
<1B>
16
<44>
16
abbcccn~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies a barcode with a ratio of 1:2 between narrow bar and wide bar.
[Format]
<D>abbcccn~n
● Parameter
a [Barcode type] = Refer to table below
b [Narrow bar width] = 01 to 12 dots
c [Barcode height] = 001 to 999 dots
n [Print data] = Data
Barcode type (Depending on the barcode type, there might be the case that there is no ratio specified for the module draw up)
a
Barcode type
Information
Ratio
0
CODABAR (NW-7)
Always include start and stop characters in print data.
Start/stop characters are [A, B, C, D, E, N, T, a, b, c, d, e, n, t]
Example) In case of barcode data [123]: [A123A]
Inter-character pitch of barcode becomes valid.
For print data specifications, refer to table of CODABAR (NW-7) code
1:2
1
CODE39
Always include start and stop characters in print data.
Start/stop character is [*]
Example) In case of barcode data [12345]: [*12345*]
Inter-character pitch of barcode is valid.
For print data specifications, refer to table of CODE39 code
1:2
2
ITF
Put the print data in even-number digits
If putting the print data in odd-number digits “0” will be added on the head of the print
data.
For print data specifications, refer to table of ITF code
1:2
3
JAN/EAN-13
Guard bars: On, Human-readable interpretation: Off
For print data specifications, refer to table of JAN/EAN13 code
Fixed
4
JAN/EAN-8
Guard bars: On, Human-readable interpretation: Off
For print data specifications, refer to table of JAN/EAN-8 code
Fixed
5
Industrial 2of5
Inter-character pitch of the barcode is valid
For print data specifications, refer to table of Industrial 2of5 code
1:2
6
Matrix 2of5
Inter-character pitch of the barcode is valid
For print data specifications, refer to table of Matrix 2of5 code
1:2
H
UPC-A
Guard bars: On, Human-readable interpretation: Off
For print data specifications, refer to table of UPC-A code
Fixed
[Coding example 1] Barcode type: CODABAR (NW-7), Narrow bar width: 03, Barcode height: 120, Print data: A1234A
<A>
<V>100<H>100
<D>003120A1234A
<Q>2
<Z>
Barcode (Ratio 1:2)