SATO WS4 Series - ESC+& Store Form Overlay

25
Modification
Available for
WS4 series
ESC+& Store Form Overlay
ESC+&
Hex code
ESC
&
Parameter
<1B>
16
<26>
16
None
Default setting
None
Persistence of
the command
When printer is powered off
Command settings will not be retained
Valid range
Will be retained until next valid setting
Validity after a job
Will be retained until next valid setting
[Function]
Registers form-overlay
[Format]
<&>
[Coding example]
<A>
<V>100<H>50<FW>1010V800H750
<V>100<H>50<FW>0505V760H710
<V>150<H>100<OA>MODEL
<&>
<Z>
[Notes]
1. After having registered a specific form overlay <&>, this format can be loaded by </> and applied to any print data.
2. The form overlay register function is set at the end of a format specification. The form overlay is valid over the entire print range.
3. Only one format can be registered.
4. If willing to change the format, first clear the form overlay with <*&> before setting the form overlay another time.
5. The registered format can be loaded with </>.
6. If selecting a label size according to <A1> the registered form overlay will be expanded.
[Valid commands]
WS4 series
Print position
<V>
<H>
Modification
<WD>
<FW>
<(>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<U>
<S>
<M>
<WB>
<WL>
<OA>
<OB>
<RD>
<$=>
Barcode
<B>
<BC>
<BG>
<BI>
<BF>
<BP>
<D>
<D><d>
<BD>
<BT>
<BW>
2D code
<BK>
<BQ>
<BV>
<BX>
<2D10>
<2D12>
<2D20>
<2D30>
<2D31>
<2D50>
<2D51>
Graphic
<G>
<GM>
<GP>
Store Form Overlay