SATO WS4 Series - ESC+YS Store Format

209
Memory Card
Available for
WS4 series
ESC+YS Store Format
ESC+YS
HEX code
ESC
YS
Parameter
<1B>16
<59>16<53>16
,aaa
Default setting
None
Persistence of the
command
When printer is powered off
Set parameter will be retained
Validity in a job
Retained until next valid setting
Validity after a job
Retained until next valid setting
[Function]
Stores a format field description.
[Format]
<YS>,aaa
● Parameter
a [Format number to be stored] = Valid range: 1 to 999
[Coding example]
<A>
<CC>1
<YS>,1
</N>,3,3
<%>0<V>100<H>200<P>2<L>0101<XM>ABC
<Z>
[Notes]
1. When storing multiple formats, each format shall be placed between enter the Start Code <A> and the Stop Code <Z> commands.
2. The Card Slot <CC> command must be sent prior to this command.
3. Use this command in conjunction with the Store Field command </N>.
4. Attempts to store using a predefined field number will result in an error and the target content will be printed.
[Valid commands]
WS4 series
Print position
<V>
<H>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<U>
<S>
<M>
<WB>
<WL>
<OA>
<OB>
<K1>
<K2>
<k1>
<k2>
<C2>
<C4>
<c2>
<c4>
Barcode
<B>
<BC>
<BG>
<BI>
<BZ>
<D>
<D><d>
<BD>
<BT>
<BW>
Modification
<P>
<L>
<PS>
<PR>
<%>
<FW>
<(>
<WD>
System
<A1>
<A3>
Memory card
<&R>
</N>
<GR>
<GC>
Store Format