SATO WS4 Series - Esc

24
Modification
Available for
WS4 series
ESC+( Inversed Color Print
ESC+(
Hex code
ESC
(
Parameter
<1B>
16
<28>
16
aaaa,bbbb
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Sets reversed color print (black/white)
[Format]
<(>aaaa,bbbb
● Parameter
a [Valid range in horizontal direction] = Valid range : Refer to table below
b [Valid range in vertical direction] = Valid range : Refer to table below
[Coding example] Valid range in horizontal direction: 200, Valid range in vertical direction: 70
<A>
<V>50<H>50<P>2<L>0202<OA>ABC
<V>50<H>50<(>200,70
<Q>2
<Z>
V50
(dots)
H50 (dots)
200 (dots)
70
(dots)
[Notes]
1. The horizontal and vertical print positions <H>, <V> are set before the inversed printing color setting <(>.
2. If the print start position is outside of the printable area, it will not print due to a command error.
[Tips]
1. Make sure the black print does not exceed 30% of the entire label.
[Valid range]
Model
Horizontal line length in dots
Vertical line length in dots
WS408DT/TT
1 to 832
1 to 7992
WS412DT/TT
1 to 1248
1 to 11988
Print direction
Inversed Color Print